Navigation

10-16 inch placement machine

Current location:Home > Products > 10-16 inch placement machine

PTD-212 placement machine

Product time:2020/10/16

A brief description:

TD-212 automatic placement machine, suitable for 10-15.6 inch soft-to-hard (or touch screen film material to substrate) lamination. The equipment adopts a unique design concept to automatically separate the release film from the film material and absorb it in the vacuum at the same time. The substrate on the platform automatically enters the laminating station, precise,

Detail
 

    TD-212 automatic placement machine, suitable for 10-15.6 inch soft-to-hard (or touch screen film material to substrate) lamination. The equipment adopts a unique design concept to automatically separate the release film from the film material and absorb it in the vacuum at the same time. The substrate on the platform automatically enters the bonding station, and the film material is accurately and quickly bonded to the substrate. The equipment uses PLC control system and grating induction, the equipment is safe, reliable, highly automated and easy to operate.
    
    Practical application
    
    The equipment is suitable for the soft-to-hard lamination between 7 inches and 17.3 inches (both sheets and coils)
    
    Bonding of glass cover plate and explosion-proof membrane
    
    The bonding of AB glue and tempered glass
    
    Bonding of polarizer and cover
    
    OCA and functional film bonding
    
    TP front and back 1:1 protective film bonding
    
    Fitting of mobile phone protection
    
    Three modes: automatic mode, pedal mode or button mode
    
    Equipment workflow
    
    Manual feeding to the vacuum platform;
    
    In automatic mode, the operator places the product on the lower vacuum platform, the sensor starts vacuum adsorption and tears the film, the operator leaves the sensing area of the vacuum platform, and the equipment starts automatically;
    
    Synchronous operation of mechanical structure;
    
    After the upper indenter sucks the diaphragm, the correction structure automatically corrects the diaphragm, and the upper indenter moves to the laminating station;
    
    The lower vacuum platform runs to the bonding station to complete the bonding;
    
    After the lamination is completed, the upper pressure head will leave and take the film;
    
    The lower vacuum platform runs to the sensing area, and the operator removes the finished product, and then places another piece of product, which automatically absorbs and tears the film to complete the bonding cycle.

 


Advisory

Message box

  • Product:

  • Contents:

  • Name:

  • Phone:

  • E-mail:

  • Address:

Recommended Products

If you have any questions, please contact us!

Contact us

Copyright ©2020 Shenzhen IDSC Electronic Technology Co., Ltd. All rights reserved

ContactQR code

Phone

0755-82256798

Scan and follow us